High Traffic Carpet Cleaner Spray-Stain Remover--22 OZ

Applications:

Excellent for all leather surfaces like booths, shoes, bags, jackets, saddles, belts, furniture

Directions: 

Always test for colorfastness on a small & hidden area before full application.

1. Vacuum carpets thoroughly to remove loose dirt on carpet. 
2. Shake can well before using, spray on surfaces 2-3 feet away, spread foam evenly over stains. 
3. Allow foam remain for 3 -5 minutes, then scrub with a clean, absorbent cloth, sponge or mop until stains are removed. For heavily soiled carpet,repeat applications if necessary. 
4. Blot the carpet dry with a clean, colorfast sponge or cloth.

Quality Assurance

We are committed to providing all products with the highest standards of quality, our quality assurance involves all staff, at every level of company. The advanced Quality Management and Control System has enabled us to achieve ISO: 9001 quality system, ISO: 14001 environmental system and many other factory audits. We will ensure the consistent quality of your products through below steps.

1. Conduct complete inspection for all incoming components and raw materials
2. Maintain Good Aerosol Manufacturing, Chemical filling and Packaging Practices.
3. Conduct rigorous in-process and finished product inspections by in-house QC team.
4. Continuously train all our employees.
5. Factory Auditing with third parties and governmental agencies

Turnkey Solutions

With state-of-the-art labs, 1.5 million manufacturing site, 1,200 skilled manpower, experienced teams of chemist, technicians and designers, we have the great advantage of providing our customers with the private label services and custom contract aerosol packaging for companies large and small.

1. Advise you on all aspects relating to your product and its development.
2. Packaging solution in a cost effective way.
3. Process customer-supplied labels or logos.
4. Regulatory supports and Accurate blending system of propellants.
5. Provide the best formulations within your specified parameters.

Whole in-House Manufacturing Process Control

1. Electrolytic Tinplate
2. Coil Cutting
3. Interior and Exterior Coating
4. Lithography
5. Domes（Cones) Manufacturing
6. Bodymaker 
7. Can Assembly
8. Leak Tester
9. Chemical Blending and Liquid Filling
10. Fit Valve
11. Inject Propellants
12. Fit Acurator and Cap
13. Date and batch coded
14. Labeling(optional)
15. Shirnk wrap and boxed

Company Profile