Powerful Foaming Oven and Stove Cleaner Spray

Applications:

Ideal for ovens, grills, broilers, ventilating hoods, splash panels, steam tabletops, pots, pans, fryers and griddles.

Directions: 

Fast oven cleaning.  1. Preheat oven to 200 F (93 C), then turn oven off . 2. Wear long rubber gloves. 3. Spread several layers of newspaper under oven door and surrounding areas to protect floor, remove racks for easy application. 4. Shake before using, hold can upright and spray surfaces from a distance of 9-12 inches, begin with top of oven first, then sides and bottom, be sure all surfaces are covered with foam. 5.Close oven doors after applying cleaner. 6. Allow foam to work at least 5 minutes then clean with sponge, cloth or paper towels.

Overnight oven cleaning. 1. Follow above 2-5 steps and spray on cold oven. 2. Shut oven door and allow to stand overnight for at least 8 eight hours. 3. lean with damp sponge, cloth or paper towels.

Daily immediate cleaning. 1. Shake before using, hold can upright and spray spots at a distance of 9-12 inches. 2. Allow the foam to work at least 1 minute. 3. Wipe clean with a damp sponge, cloth or paper towels. Repeat 3 steps for heavily encrusted spots.

Quality Assurance

We are committed to providing all products with the highest standards of quality, our quality assurance involves all staff, at every level of company. The advanced Quality Management and Control System has enabled us to achieve ISO: 9001 quality system, ISO: 14001 environmental system and many other factory audits. We will ensure the consistent quality of your products through below steps.

1. Conduct complete inspection for all incoming components and raw materials
2. Maintain Good Aerosol Manufacturing, Chemical filling and Packaging Practices.
3. Conduct rigorous in-process and finished product inspections by in-house QC team.
4. Continuously train all our employees.
5. Factory Auditing with third parties and governmental agencies

Turnkey Solutions

With state-of-the-art labs, 1.5 million manufacturing site, 1,200 skilled manpower, experienced teams of chemist, technicians and designers, we have the great advantage of providing our customers with the private label services and custom contract aerosol packaging for companies large and small.

1. Advise you on all aspects relating to your product and its development.
2. Packaging solution in a cost effective way.
3. Process customer-supplied labels or logos.
4. Regulatory supports and Accurate blending system of propellants.
5. Provide the best formulations within your specified parameters.

Whole in-House Manufacturing Process Control

1. Electrolytic Tinplate
2. Coil Cutting
3. Interior and Exterior Coating
4. Lithography
5. Domes（Cones) Manufacturing
6. Bodymaker 
7. Can Assembly
8. Leak Tester
9. Chemical Blending and Liquid Filling
10. Fit Valve
11. Inject Propellants
12. Fit Acurator and Cap
13. Date and batch coded
14. Labeling(optional)
15. Shirnk wrap and boxed

Company Profile